Loading Events

« All Events

Ph.D. (Engg): Experimental Investigation of Coherent Structures, Air-Fuel Mixing, and Soot Formation in a Model Rich-Quench-Lean Combustor

November 19 @ 3:00 PM - 5:00 PM

Rich-Quench-Lean (RQL) combustion is a promising technology for gas turbine combustors, offering improved altitude relight capability, reduced flashback risk, enhanced flame stability, high combustion efficiency, and low NOx emissions. These advantages arise from fuel-rich combustion in the primary zone, followed by rapid dilution through quench jets and lean combustion. However, the fuel-rich region is susceptible to soot formation. The complex swirling flow, interaction between fuel and swirling air streams, and coupling between quench jets and the primary flow strongly influence air-fuel mixing, flame stabilization, and pollutant formation. Despite their importance, these interactions and the underlying flow and mixing mechanisms, particularly their dependence on swirl intensity, remain insufficiently understood. This work experimentally investigates the flow field, air-fuel mixing, reaction zone structure, and soot concentration in a model RQL combustor under atmospheric pressure conditions, with particular emphasis on the effects of fuel-injector and quench-air flows.

The investigation is conducted using an optically accessible model RQL combustor equipped with a high-shear nozzle/swirler (HSNS) and a central radial-jet fuel injector. Three swirl configurations, designated as high, medium, and low swirl, with effective swirl numbers of 0.62, 0.55, and 0.36, respectively, are considered. A systematic investigation is conducted under non-reacting conditions to assess the influence of swirl intensity, fuel-injector flow, and downstream quench-air injection on the combustor flow field and to identify a suitable configuration for subsequent reacting studies. Two-Component Particle Image Velocimetry (2C-PIV) at 5 Hz is employed to characterize the velocity field, while acetone Planar Laser-Induced Fluorescence (PLIF) at 10 Hz is used to quantify fuel concentration and investigate air-fuel mixing. Based on the non-reacting flow and mixing characteristics, the high-swirl configuration is selected for the subsequent soot and flame-structure investigations under reacting conditions. Laser-induced Incandescence (LII), OH-PLIF, and OH* chemiluminescence (all at 10 Hz) are employed to characterize soot concentration and flame structure. Proper Orthogonal Decomposition (POD) is used to identify the dominant coherent structures and examine their contributions to the flow and flame dynamics.

The velocity measurements reveal distinct flow characteristics at the three swirl intensities. At high swirl, the baseline flow is characterized by a strong Inner Recirculation Zone (IRZ), with Kelvin-Helmholtz Instability (KHI)-driven vortex rings dominating the flow dynamics, while the Precessing Vortex Core (PVC) constitutes a secondary coherent structure. At medium swirl, the IRZ is weaker, and the PVC becomes dominant, accompanied by pronounced IRZ-width pulsations and weaker KHI activity. These differences are attributed to changes in the interaction between the IRZ and the centerbody wake. At low swirl, a weak IRZ forms considerably downstream of the swirler, making this configuration less suitable for flame stabilization. Introducing fuel-injector flow at 5% of the primary-air flow reduces swirl intensity, recirculation strength, and shear-layer activity at both high and medium swirl. However, the PVC response differs due to competing effects of swirl reduction and intermittent IRZ detachment. Quench-air injection produces aerodynamic blockage and modulates near-swirler turbulence through its upstream entrainment, resulting in a moderate weakening of the coherent structures. Overall, the fuel-injector flow has a stronger influence on the primary flow field than the quench-air flow.

The fuel concentration measurements demonstrate that the majority of mixing between air-fuel and inner-outer swirler streams occurs within the shear layers, particularly within 40 mm downstream of the swirler. At high swirl, mixing is predominantly governed by symmetric KHI-driven vortex rings, with a secondary contribution from the PVC. In contrast, the PVC dominates at medium swirl, resulting in asymmetric fuel distribution and a lower mixing rate, as estimated from the Scalar Dissipation Rate (SDR). Quench-air injection leads to upstream entrainment through the IRZ and outer recirculation zone (ORZ), which is more pronounced at medium swirl. Although the dominant mixing mechanisms and overall mixing rates remain largely unchanged, quench-air injection introduces intermittency in the fuel concentration field, reflected in a bimodal probability distribution. This behavior is associated with fluctuations in aerodynamic blockage and the resulting redistribution of primary air flow between the inner and outer swirlers. The high-swirl configuration exhibits comparatively lower sensitivity to quench-air injection and is therefore selected for the subsequent soot investigation under reacting conditions.

Under reacting conditions, a V-shaped flame is primarily stabilized within the IRZ, with the major heat-release region confined to 70 mm downstream of the swirler. Attached and lifted flame structures coexist in the near-swirler region, accompanied by periodic local blow-off and reignition of the flame. The flame dynamics are dominated by an axisymmetric coherent structure associated with IRZ-width pulsations and KHI. Without quench jets, soot is predominantly concentrated within the IRZ and downstream of the primary reaction zone, with a typical concentration of approximately 8 ppb. Quench-air injection has a negligible effect on the primary flame structure but produces a secondary reaction zone near the quench jets. The overall soot concentration decreases significantly to approximately 1 ppb. Upstream entrainment of quench air dilutes the fuel-rich mixture and inhibits soot formation in the primary region, while enhanced oxidation by fresh quench air reduces the downstream soot concentration.

Overall, this thesis establishes the relationships between swirling-flow dynamics, air-fuel mixing, and reacting-flow characteristics in a model RQL combustor. The findings demonstrate how swirl intensity governs the dominant coherent structures and mixing mechanisms, while fuel-injector and quench-air flows modify the primary flow field and fuel distribution. Furthermore, the combined non-reacting and reacting investigations provide insights into the role of upstream quench-air entrainment in modifying the air-fuel mixture and influencing soot formation. These findings contribute to the understanding needed for the design and development of RQL combustors, while the resulting experimental database provides valuable reference data for validating numerical simulations.

Speaker: Kundan Kumar

Research Supervisor: Dr. Irfan A. Mulla

Details

Date:
November 19
Time:
3:00 PM - 5:00 PM
Event Category:

Other

Speaker
Kundan Kumar
Scroll to Top