BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Department of Aerospace Engineering - ECPv6.6.3//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://aero.iisc.ac.in
X-WR-CALDESC:Events for Department of Aerospace Engineering
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:Asia/Kolkata
BEGIN:STANDARD
TZOFFSETFROM:+0530
TZOFFSETTO:+0530
TZNAME:IST
DTSTART:20260101T000000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=Asia/Kolkata:20261102T153000
DTEND;TZID=Asia/Kolkata:20261102T170000
DTSTAMP:20261121T041853
CREATED:20261030T053107Z
LAST-MODIFIED:20261102T053137Z
UID:10000160-1793633400-1793638800@aero.iisc.ac.in
SUMMARY:Ph.D. (Engg): Large-scale unsteadiness in high-speed double cone flows
DESCRIPTION:Shock-wave/separation-region interactions (SSRI) in high-speed flows can lead to large-scale self-sustained unsteadiness when the separation region grows to dimensions comparable to the characteristic length scales of the flow geometry. A canonical example is the high-speed double-cone flow — over a certain range of geometric parameters this configuration exhibits a large-amplitude periodic shock-wave unsteadiness\, commonly referred to as “pulsation.” This effort aims to establish a physics-based framework for the understanding of flow pulsation and explore novel methodologies for possible control of the unsteady phenomenon. \nStudies in literature suggest that pulsation is triggered when the adverse pressure gradient over the fore-cone surface becomes sufficiently strong to generate a large-scale reverse flow within the separation region. The subsequent evolution of this reverse flow is believed to directly lead to the periodic growth and collapse of the separation region and the accompanying large-scale shock-wave motion. The precise role of flow reversal in governing pulsation remains an open question. A direct way to address it is to systematically modify the reverse-flow dynamics and examine the resulting changes in the pulsation behavior. To this end\, the reverse-flow dynamics are manipulated using passive and active microjet flow-control methodologies in the present work. The passive method exploits the pressure difference that develops naturally during the pulsation cycle to generate self-sustained microjets without external energy input\, whereas the active-control method employs externally driven microjets to introduce controlled downstream-directed momentum into the separation region. In both approaches the injected momentum directly opposes the naturally occurring reverse flow\, thereby altering its dynamics. The resulting changes in the flow are investigated experimentally at Mach 6 in the Roddam Narasimha Hypersonic Wind Tunnel. \nBoth flow manipulation methodologies demonstrate that systematic modification of the reverse-flow dynamics fundamentally alters the pulsation behavior. Passive control significantly increases the characteristic pulsation time scale while progressively reducing the temporal coherence of the canonical pulsation. Detailed analysis shows that increasing passive actuation strength transforms the canonical pulsation from a highly coherent\, nearly periodic motion into a weakly coherent large-scale unsteadiness characterized by broadband spectral content. While active control is seen to suppress the canonical pulsation altogether\, producing a sequence of flow states consisting of small-amplitude undulations and\, at sufficiently large actuation strength\, a quasi-steady shock wave configuration. Collectively\, these observations provide direct experimental evidence that reverse-flow dynamics are a key component of pulsation\, and that their systematic manipulation provides an effective strategy for controlling pulsation-type unsteadiness. \nIn addition to experimentally characterizing pulsation and demonstrating its control\, a quantitative physics-based framework for predicting the characteristic pulsation time scale is developed as a part of the present effort. The double-cone geometry is parameterized by the fore-cone angle (theta_1)\, aft-cone angle (theta_2)\, and the ratio of the conical slant lengths (lambda). To obtain a tractable analytical description while retaining the essential flow physics\, attention is focused on the spike-cylinder configuration (theta_1 = 0 degrees\, theta_2 = 90 degrees)\, which represents a limiting case of the general double-cone geometry. To develop and assess the proposed framework\, a dedicated series of Mach 6 experiments were conducted by systematically varying lambda while keeping theta_1 and theta_2 fixed. High-speed schlieren imaging together with time-resolved pressure measurements were employed to characterize the unsteady flow field. Guided by the experimental observations\, pulsation is interpreted as a cyclic process involving the accumulation of high-pressure gas in the region ahead of the aft cone\, and subsequent expansion of the gas through the low-pressure separation region over the fore cone. Based on this physical picture\, an analytical model containing no empirical parameters is developed. The model successfully predicts the experimentally measured pulsation Strouhal number and provides the first quantitative framework linking the governing flow physics to the characteristic pulsation time scale. \nOverall\, the present work establishes a coherent physical framework for understanding pulsation-type unsteadiness in high-speed double-cone flows. The passive- and active-control studies demonstrate experimentally that systematic manipulation of the reverse-flow dynamics fundamentally alters the pulsation behavior. Complementing these observations\, the analytical model quantitatively links the governing gas-dynamic processes to the characteristic pulsation time scale and provides a predictive framework for estimating the pulsation frequency from first principles. Together\, these contributions advance the current understanding of pulsation-type unsteadiness and establish a physics-based foundation for control and prediction. \nSpeaker : Subhajit Das \nResearch Supervisor : Prof. Duvvuri Subrahmanyam
URL:https://aero.iisc.ac.in/event/ph-d-engg-large-scale-unsteadiness-in-high-speed-double-cone-flows/
LOCATION:STC Seminar Hall\, Dept. of Aerospace Engineering
CATEGORIES:Thesis Colloquium / Defence
ATTACH;FMTTYPE=image/jpeg:https://aero.iisc.ac.in/wp-content/uploads/2026/10/Subhajit-Das.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Asia/Kolkata:20261103T150000
DTEND;TZID=Asia/Kolkata:20261103T170000
DTSTAMP:20261121T041853
CREATED:20261002T093202Z
LAST-MODIFIED:20261103T093048Z
UID:10000161-1793718000-1793725200@aero.iisc.ac.in
SUMMARY:Linear instabilities in modulated Taylor-Couette flows"
DESCRIPTION:The modulated Taylor-Couette flow takes place in the annular gap between two concentric cylinders\, assumed of infinite extent in the\naxial direction. Inner and outer cylinders rotate about their common axis with two independent rotation rates that are periodically modulated in time. While there exists a significant literature on the time-periodic Taylor-Couette configuration\, many investigations have addressed purely oscillating situations\, and the dynamics of the general problem where steady and oscillating flow components cooperate is not yet fully understood.\nThe radius ratio fixes the geometry and the Womersley number characterizes the modulation frequency. Assuming harmonic modulation of the cylinders’ rotation rates\, the flow dynamics is further governed by four Reynolds numbers accounting for the steady and\noscillating velocities of inner and outer cylinders.Linear instability features such as complex growth rates and Floquetmultipliers are computed with two different methods: generalized eigenvalue problems using Floquet theory and direct numerical simulations of the linearized Navier-Stokes equations. Neutral\nstability boundaries in the multi-dimensional parameter space are obtained with continuation methods.\nOur study systematically explores the effects of varying all non-dimensional control parameters.\nFor narrow-gap configurations\, low Womersley numbers and increasing oscillation amplitudes initially show destabilizing effects and  eventually lead to the emergence of multiple neutral curves\, demarcated by harmonic and subharmonic instability transitions. At higher Womersley numbers\, these transitions shift to significantly larger oscillation amplitudes. Wider-gap systems display harmonic-subharmonic bifurcations at even lower values of oscillation\namplitude\, indicating enhanced sensitivity of the flow to temporalmodulation and large curvature effects.\nOur findings analyse the fine mechanisms of the harmonic-subharmonic bifurcations\, provide a comprehensive map of the stability boundaries in modulated Taylor-Couette systems and reveal the critical role of geometry and modulation parameters in shaping the onset of instabilities.\n\nSpeaker : Benoît PIER
URL:https://aero.iisc.ac.in/event/linear-instabilities-in-modulated-taylor-couette-flows/
LOCATION:Auditorium (AE 005)\, Department of Aerospace Engineering
CATEGORIES:AE Seminar
ATTACH;FMTTYPE=image/png:https://aero.iisc.ac.in/wp-content/uploads/2026/11/Benoit-PIER.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Asia/Kolkata:20261112T150000
DTEND;TZID=Asia/Kolkata:20261112T170000
DTSTAMP:20261121T041853
CREATED:20261112T052311Z
LAST-MODIFIED:20261116T102947Z
UID:10000163-1794495600-1794502800@aero.iisc.ac.in
SUMMARY:Bespoke Elasticity and the Nonlinear Analogue of Cauchy’s Relations 
DESCRIPTION:Is it possible to design an architectured material or structure whose elastic energy is arbitrarily close to a specified continuous function? This is possible in one dimension\, up to an additive constant [Dixon et al. (2019) https://doi.org/10.1098/rspa.2019.0547]. After a review of that result\, we explore the situation in two dimensions: Given (i) a continuous energy function E(C)\, defined for two-dimensional right Cauchy–Green deformation tensors C contained in some compact set\, and (ii) a tolerance ϵ > 0\, can we construct a spring-node unit cell (of a lattice) whose energy is approximately E\, up to an additive constant\, with L∞ -error no more than ϵ? We show that the answer is yes for affine Es (i.e.\, for energies E that are quadratic in the deformation gradient) but that the general situation is more subtle and is related to the generalisation of Cauchy’s relations to nonlinear elasticity. If time permits\, we will also explore the three-dimensional situation. \nChenchiah IV. Bespoke two-dimensional elasticity and the nonlinear analogue of Cauchy’s relations (2024) https://doi.org/10.1177/10812865231198204 \nSpeaker: Dr Isaac Chenchiah\n \nBiography:\n\nDr Isaac Chenchiah is an Associate Professor in the School of Mathematics at the University of Bristol. He obtained his B.Tech. from IIT Madras and his M.S. and Ph.D. from the California Institute of Technology. He subsequently held a postdoctoral position at the Max Planck Institute for Mathematics in the Sciences\, Germany. His research connects applied mathematics with solid and structural mechanics and biology\, using partial differential equations\, the calculus of variations\, and multiscale methods. His interests include microstructure in multiphase solids\, adaptive and architectured structures\, morphoelasticity\, wound healing\, and the mechanics of biological sensing.\n\nAll are welcome. Tea will served at 4 PM after the talk.
URL:https://aero.iisc.ac.in/event/bespoke-elasticity-and-the-nonlinear-analogue-of-cauchys-relations/
LOCATION:Auditorium (AE 005)\, Department of Aerospace Engineering
CATEGORIES:AE Seminar
ATTACH;FMTTYPE=image/jpeg:https://aero.iisc.ac.in/wp-content/uploads/2026/11/Today-Copy-Copy-scaled.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Asia/Kolkata:20261113T140000
DTEND;TZID=Asia/Kolkata:20261113T170000
DTSTAMP:20261121T041853
CREATED:20261110T051042Z
LAST-MODIFIED:20261116T102056Z
UID:10000162-1794578400-1794589200@aero.iisc.ac.in
SUMMARY:Ph.D. (Engg):Thermal Sensitivity of Lamb Waves in UD-CFRP Laminates: Modeling and Experimental Validation
DESCRIPTION:Guided-wave structural health monitoring (SHM) locates damage from the arrival times of Lamb waves. Temperature\, however\, changes the wave velocities\, and baseline subtraction then leaves false scatter that can look like real damage. In carbon-fiber-reinforced polymer (CFRP) composites the problem is more pronounced: temperature acts mainly through the matrix\, so its effect depends on mode\, frequency and direction. Compensation still relies on temperature-swept baselines\, and the directional thermal sensitivity of unidirectional (UD) CFRP has not been characterized continuously over frequency and angle.\nThis thesis predicts the thermal sensitivity of Lamb waves in UD-CFRP from the measured behavior of the matrix and validates the predictions experimentally. The storage modulus of the epoxy\, measured by dynamic mechanical analysis (DMA)\, falls by about 20 % from 30 to 70 °C. Mori-Tanaka homogenization turns this into the lamina stiffness. The fiber-dominated term C11 barely changes\, while the matrix-dominated terms drop by 12-17 %. These properties feed a semi-analytical finite element (SAFE) model\, which gives the velocities of the A0 and S0 modes over frequency-thickness\, direction and temperature.\nDirectional thermal sensitivity maps of the group velocity are then built for both modes. Heating shifts the dispersion curves to lower frequency-thickness and\, in general\, slows both modes. The A0 sensitivity is negative and nearly uniform with frequency and direction\, so a single correction can be enough. The S0 sensitivity is small at low frequency-thickness along the fibers. It grows across the fibers\, where the matrix-dominated stiffness governs. Near the S0 modal transition (the veering point) it becomes large and changes sign. The maps show a closed\, direction-dependent zero-sensitivity locus of S0. Along this locus the group velocity is locally insensitive to temperature. The maps also show how the locus moves as temperature rises.\nFor validation\, a 30-ply UD-CFRP laminate was made by hand lay-up with vacuum bagging. X-ray-aligned pairs of piezoelectric wafer active sensors (PWAS) were bonded along and across the fibers for pitch-catch tests\, with repeatability checks and controlled thermal cycling between 30 and 70 °C. The measurements confirm the predicted drop in group velocity in all four mode-direction configurations\, and SAFE identifies the least sensitive configuration\, longitudinal S0.\nThese results give a physics-based route from matrix DMA data to the directional thermal sensitivity of Lamb waves in UD-CFRP. They can guide temperature-resilient SHM by choosing the mode\, frequency and direction that keep the thermal error low.\n\nKeywords: Lamb waves; guided-wave SHM; CFRP laminates; thermal sensitivity; SAFE method; PWAS.\n\n\nSpeaker: Nilesh Chhagan Bagale\n\nResearch Supervisors: Dr M. Ramachandra Bhat and Prof. Dineshkumar Harursampath
URL:https://aero.iisc.ac.in/event/ph-d-enggthermal-sensitivity-of-lamb-waves-in-ud-cfrp-laminates-modeling-and-experimental-validation/
LOCATION:AE Conference Room \, AE 003
CATEGORIES:Thesis Colloquium / Defence
ATTACH;FMTTYPE=image/jpeg:https://aero.iisc.ac.in/wp-content/uploads/2026/11/Nilesh-Chhagan-Bagale.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Asia/Kolkata:20261119T150000
DTEND;TZID=Asia/Kolkata:20261119T170000
DTSTAMP:20261121T041853
CREATED:20261112T064231Z
LAST-MODIFIED:20261116T105121Z
UID:10000164-1795100400-1795107600@aero.iisc.ac.in
SUMMARY:Ph.D. (Engg): Experimental Investigation of Coherent Structures\, Air-Fuel Mixing\, and Soot Formation in a Model Rich-Quench-Lean Combustor
DESCRIPTION:Rich-Quench-Lean (RQL) combustion is a promising technology for gas turbine combustors\, offering improved altitude relight capability\, reduced flashback risk\, enhanced flame stability\, high combustion efficiency\, and low NOx emissions. These advantages arise from fuel-rich combustion in the primary zone\, followed by rapid dilution through quench jets and lean combustion. However\, the fuel-rich region is susceptible to soot formation. The complex swirling flow\, interaction between fuel and swirling air streams\, and coupling between quench jets and the primary flow strongly influence air-fuel mixing\, flame stabilization\, and pollutant formation. Despite their importance\, these interactions and the underlying flow and mixing mechanisms\, particularly their dependence on swirl intensity\, remain insufficiently understood. This work experimentally investigates the flow field\, air-fuel mixing\, reaction zone structure\, and soot concentration in a model RQL combustor under atmospheric pressure conditions\, with particular emphasis on the effects of fuel-injector and quench-air flows. \nThe investigation is conducted using an optically accessible model RQL combustor equipped with a high-shear nozzle/swirler (HSNS) and a central radial-jet fuel injector. Three swirl configurations\, designated as high\, medium\, and low swirl\, with effective swirl numbers of 0.62\, 0.55\, and 0.36\, respectively\, are considered. A systematic investigation is conducted under non-reacting conditions to assess the influence of swirl intensity\, fuel-injector flow\, and downstream quench-air injection on the combustor flow field and to identify a suitable configuration for subsequent reacting studies. Two-Component Particle Image Velocimetry (2C-PIV) at 5 Hz is employed to characterize the velocity field\, while acetone Planar Laser-Induced Fluorescence (PLIF) at 10 Hz is used to quantify fuel concentration and investigate air-fuel mixing. Based on the non-reacting flow and mixing characteristics\, the high-swirl configuration is selected for the subsequent soot and flame-structure investigations under reacting conditions. Laser-induced Incandescence (LII)\, OH-PLIF\, and OH* chemiluminescence (all at 10 Hz) are employed to characterize soot concentration and flame structure. Proper Orthogonal Decomposition (POD) is used to identify the dominant coherent structures and examine their contributions to the flow and flame dynamics. \nThe velocity measurements reveal distinct flow characteristics at the three swirl intensities. At high swirl\, the baseline flow is characterized by a strong Inner Recirculation Zone (IRZ)\, with Kelvin-Helmholtz Instability (KHI)-driven vortex rings dominating the flow dynamics\, while the Precessing Vortex Core (PVC) constitutes a secondary coherent structure. At medium swirl\, the IRZ is weaker\, and the PVC becomes dominant\, accompanied by pronounced IRZ-width pulsations and weaker KHI activity. These differences are attributed to changes in the interaction between the IRZ and the centerbody wake. At low swirl\, a weak IRZ forms considerably downstream of the swirler\, making this configuration less suitable for flame stabilization. Introducing fuel-injector flow at 5% of the primary-air flow reduces swirl intensity\, recirculation strength\, and shear-layer activity at both high and medium swirl. However\, the PVC response differs due to competing effects of swirl reduction and intermittent IRZ detachment. Quench-air injection produces aerodynamic blockage and modulates near-swirler turbulence through its upstream entrainment\, resulting in a moderate weakening of the coherent structures. Overall\, the fuel-injector flow has a stronger influence on the primary flow field than the quench-air flow. \nThe fuel concentration measurements demonstrate that the majority of mixing between air-fuel and inner-outer swirler streams occurs within the shear layers\, particularly within 40 mm downstream of the swirler. At high swirl\, mixing is predominantly governed by symmetric KHI-driven vortex rings\, with a secondary contribution from the PVC. In contrast\, the PVC dominates at medium swirl\, resulting in asymmetric fuel distribution and a lower mixing rate\, as estimated from the Scalar Dissipation Rate (SDR). Quench-air injection leads to upstream entrainment through the IRZ and outer recirculation zone (ORZ)\, which is more pronounced at medium swirl. Although the dominant mixing mechanisms and overall mixing rates remain largely unchanged\, quench-air injection introduces intermittency in the fuel concentration field\, reflected in a bimodal probability distribution. This behavior is associated with fluctuations in aerodynamic blockage and the resulting redistribution of primary air flow between the inner and outer swirlers. The high-swirl configuration exhibits comparatively lower sensitivity to quench-air injection and is therefore selected for the subsequent soot investigation under reacting conditions. \nUnder reacting conditions\, a V-shaped flame is primarily stabilized within the IRZ\, with the major heat-release region confined to 70 mm downstream of the swirler. Attached and lifted flame structures coexist in the near-swirler region\, accompanied by periodic local blow-off and reignition of the flame. The flame dynamics are dominated by an axisymmetric coherent structure associated with IRZ-width pulsations and KHI. Without quench jets\, soot is predominantly concentrated within the IRZ and downstream of the primary reaction zone\, with a typical concentration of approximately 8 ppb. Quench-air injection has a negligible effect on the primary flame structure but produces a secondary reaction zone near the quench jets. The overall soot concentration decreases significantly to approximately 1 ppb. Upstream entrainment of quench air dilutes the fuel-rich mixture and inhibits soot formation in the primary region\, while enhanced oxidation by fresh quench air reduces the downstream soot concentration. \nOverall\, this thesis establishes the relationships between swirling-flow dynamics\, air-fuel mixing\, and reacting-flow characteristics in a model RQL combustor. The findings demonstrate how swirl intensity governs the dominant coherent structures and mixing mechanisms\, while fuel-injector and quench-air flows modify the primary flow field and fuel distribution. Furthermore\, the combined non-reacting and reacting investigations provide insights into the role of upstream quench-air entrainment in modifying the air-fuel mixture and influencing soot formation. These findings contribute to the understanding needed for the design and development of RQL combustors\, while the resulting experimental database provides valuable reference data for validating numerical simulations. \nSpeaker: Kundan Kumar \nResearch Supervisor: Dr. Irfan A. Mulla
URL:https://aero.iisc.ac.in/event/ph-d-engg-experimental-investigation-of-coherent-structures-air-fuel-mixing-and-soot-formation-in-a-model-rich-quench-lean-combustor/
LOCATION:STC Seminar Hall\, Dept. of Aerospace Engineering
CATEGORIES:AE Seminar
ATTACH;FMTTYPE=image/jpeg:https://aero.iisc.ac.in/wp-content/uploads/2026/11/Kundan-Kumar.jpg
END:VEVENT
END:VCALENDAR